Green Span Profiles receives strict Florida Approval for insulated wall panel, roof panel systems

by Brianna Crandall — February 22, 2017 — Green Span Profiles, a Texas-based manufacturer of insulated panel technologies, has received the stringent Florida Approval for all profiles of its insulated wall panel system as well as its insulated roof panel system. The company’s insulated wall panel system, with an interior and exterior steel facing bonded to a poured-in-place insulating polyisocyanurate foam core, complies with Florida Building Code 2014 Section 1405.2.

Impression insulated wall panel

Green Span Profiles’ Impression insulated wall panel system for commercial and industrial use complies with Florida Building Code 2014 Section 1405.2.

Brian N. Jaks, P.E., vice president of Sales and Marketing at Green Span Profiles, commented:

Due to the preponderance of hurricane activity in Florida, the state felt an overwhelming responsibility to approve all building products utilized within the state. The State of Florida Building Code is one of the strictest in the nation therefore, we believe these certifications are significant achievements.

Insulated wall panel system

The approved profiles are MesaLine, ShadowLine, WaveLine, VeeLine, Impression, Stucco and Infinity in thicknesses ranging from 2-6 inches with the Green-Lock interlocking tongue and groove side joint in widths up to 42 inches.

The insulated wall panel system demonstrated compliance with ASTM E1592-05 for structural performance and ASTM E84-09 for surface burning characteristics.

Insulated roof panel system

The company’s RidgeLine insulated roofing panel recently received Florida Approval for installation over open framing, demonstrating compliance with ASTM E 1592, ATM E84 and FM 4471. RidgeLine is a patented 2-3/8-inch-tall mechanically seamed roof panel covering 42 inches, with thickness options of 2.5, 3, 4, 5 and 6 inches.

The core is a continuously poured-in-place polyisocyanurate insulating foam. Exterior and interior metal panels are available in 26-, 24- and 22-gauge Galvalume steel. Exterior finish is standard gloss PVDF coating. RidgeLine panels can be used on slopes as low as 1/2:12 and are available in standard lengths measuring 12 to 53 feet, with custom lengths available on demand.

For more information, visit the Green Span Profiles Web site or click on the specific product links above.